Installation strategies for wall-mounted bathroom cabinets

Everyone knows that, as one of the three major parts of the bathroom, the bathroom cabinet not only carries the functions, storage space, etc., but can also make up the bathroom to a certain extent. At present, the types of bathroom cabinets on the market are already dazzling. According to the installation method of bathroom cabinets, they are mainly divided into floor-mounted bathroom cabinets and wall-mounted bathroom cabinets. Let's take a look at the installation strategy of wall-mounted bathroom cabinets with the editor.

Wall-mounted bathroom cabinet installation 1. Install the main cabinet first: According to the hole position on the back wall of the cabinet, select it on the wall to be installed, but the height of the counter surface from the ground is between 80-82cm. Use an impact drill to hit the wall. Put the plastic expansion of the accessories in the cabinet into the hole, and then use the self-powered screws to lock the main cabinet and the wall. After the main cabinet is installed, adjust the basin to the wooden hat of the cabinet and level it.

Installation of wall-mounted bathroom cabinet 2. Shelf, the installation method of special shelf is the same as that of the main cabinet. After drilling a hole in a suitable position on the wall, tighten it with screws.

Installation of wall-mounted bathroom cabinet III. Bathroom mirror: First, according to the position of the two holes on the back of the mirror, set the position of the two holes on the wall of the appropriate bitmap above the main cabinet, but the size of the bottom end of the mirror and the main counter surface is 23- Between 28cm, then punch a hole to screw on the self-powered screw, so that you can install the mirror.

Installation of wall-mounted bathroom cabinets 4. Side cabinets. Generally, the side cabinets are floor-standing. The floor-standing side cabinets only need to fix the cabinet feet. If the side cabinets are both wall-mounted, refer to the installation method of the main cabinet.

Precautions for the installation of bathroom cabinets

1. Design and installation of the sewer pipe: Before installing the bathroom cabinet, you must consider whether it is wall drainage or ground drainage. If it is wall drainage, the reserved hole on the wall of the sewer pipe should be between 50-55 cm from the ground, and It is the center of the cabinet. As long as the ground drainage hole is in the center of the cabinet, it should not be too far away from the wall.

2. Water inlet pipe: The outlet of the hot and cold water inlet pipe can be located in the middle of the cabinet, but the distance from the ground should be between 45-50cm or a little higher.

3. Mirror front light: If you need to install a mirror front light, the wire outlet should be about 200cm from the ground and placed in the middle of the bathroom cabinet.