After installing the shower wall panel

After installing the shower wall panel, the following points should be noted:

1. Construction Quality Inspection

• Check whether the wall panel is flat and vertical, and whether it is firmly in contact with the floor and ceiling.
• The seams must be treated with grout or waterproof sealant to ensure a seamless and aesthetically pleasing finish.
• After installation, maintenance is required for at least one week, during which knocking and vibration should be avoided.

2. Waterproofing and Moistureproofing Treatment

• It is recommended to apply waterproof coating on the wallboard surface, and the joints with the floor and ceiling should be sealed.
• The waterproof layer in the shower area should extend at least 1.8 meters above the floor.
• Regularly inspect the waterproof performance to prevent moisture penetration.

3. Daily Cleaning and Maintenance

• Clean regularly with a soft mop or vacuum cleaner, avoiding the use of acidic cleaning agents.
• Clean surface stains promptly and keep it dry.
• Avoid contact with sharp objects to prevent scratches.

4. Safety Protection

• Select wall panel materials with high fire resistance ratings.
• Keep away from open flames and power outlets.
• Regularly check if the fasteners are loose.